Skip to content

Operator Math

Three Names, One Formula

Feed rate, loading rate and mass show up as three formulas on your sheet, but each one is the same three numbers multiplied together. What you're given tells you which one you're looking at.

The middle slot decides

On your sheetWhat you haveWhat you get
Feed RateYou're adding a chemicala dose and a flow in MGDpounds per day
Loading RateSomething is coming at youa concentration and a flow in MGDpounds per day
MassSomething is sitting in a tanka concentration and a volume in MGpounds, total
THE TELL

Look at the middle number. A flow moving past you gives a rate in pounds per day. A tank volume sitting still gives a total in plain pounds.

On shift

Feed rate: you're adding it

AT THE PANEL

You're carrying 2.0 mg/L of chlorine into 0.5 MGD. How much chlorine leaves the day tank?

2.0DOSE
MG/L
8.34LB PER
GALLON
0.5FLOW
MGD
8.3LB/DAY

That's the number you order against and the number your day tank has to keep up with.

Loading rate: it's coming at you

FROM THE LAB SHEET

Influent BOD came back at 180 mg/L and the plant is taking 2.0 MGD. How much BOD is the plant actually being asked to treat?

180BOD
MG/L
8.34LB PER
GALLON
2.0FLOW
MGD
3,000LB/DAY BOD

Same arithmetic as the feed rate. Nobody dosed anything. This is what showed up at the headworks.

Mass: it's sitting in the tank

WALKING THE AERATION BASIN

Your basin holds 0.75 MG and the mixed liquor is running 2,400 mg/L. How many pounds of solids are under you right now?

2,400MLSS
MG/L
8.34LB PER
GALLON
0.75VOLUME
MG
15,000LB SOLIDS

No per day on the end. This is inventory, the pounds you're holding. It's the starting point for wasting decisions and for sludge age.

lb/dayPOUNDS PER DAYdosemg/LflowMGD8.34lb/gal

Why 8.34? It's the weight of one gallon of water in pounds. It's what lets you turn a concentration in mg/L into pounds, which is the only unit a pump, a scale or a purchase order understands.